The cable scissors can be used for cutting and stripping Cu/Al wires and for crimping wire end ferrules from 0.5 – 6 mm². The scissors are characterised by a very high cutting performance. They cut fine-stranded copper and aluminium cables up to a cross-section of 50 mm². It is possible not only to cut but also to strip wires and cables quickly and easily with this special tool. The cable is held in place in the groove during the cutting process. The fine micro serration of the blades enables flush and slip-free cutting, resulting in a very precise cut. The non-slip 2-component handles made of impact-resistant fibreglass-reinforced plastic ensure safe working.